Yes, this will be a bit of an expensive project if all of the materials for the project were going to be purchased new by Smoking Nun and Rainman229. So, we thought we would offer the opportunity for any paintball businesses or any individual paintball players to donate any of the paintball gun parts we need to complete this project. We don't want to make any money from this project. So, everything we get donated will either be used in the project or will be given away free to various paintballers who are online watching the web cast or chatting in the project chat room. So, if you (1) want to donate items to be modified and used in this project or (2) want to donate items to be used as free-giveaways for the project, contact Smoking Nun, clcotner@hotmail.com, or Rainman229, lastone75@aol.com. If you donate items, you will get credit (Read as free advertising for your shop/store/etc). Now, in terms of quality of donations, we will take pretty much anything that is functionally safe and useable. Beat up, scratched, etc. As long as it works and is safe, we will take it. Remember, we are going to make some chips fly (mill the parts) and color 'em up (re-ano), so cosmetic flaws are no biggie. Anything we don't get donated, we will buy. The bottom line is that we are committed to this project, with or without sponsorship.

For those of you who have expressed interest in making cash donations to Project Red Eye - you may do so by using the button below. Paypal the donation to redeyelockin@hotmail.com

Parts Needed:

Super E-Spyder
•Timmy Detents
•Aftermarket board and eyes (T-board or Mini-Morlock)
•HP Regulator
•Macroline fittings
•on/off ASA and rail
•Clamping feed neck – aftermarket – two-hole design

Spyder Mag
•ULE Mag Body
•Adjustable feed neck
•Mag vertical adaptor
•RT compatible Mag Rail
•RT compatible Mag Sear
•ULT trigger kit
•RT or X-Valve
•Level 7 bolt
•Spyder E-frame (could come as a complete marker, as we will need the body for the Spimmy (#3 below)
•Mag vertical Adaptor
•Aftermarket board and eyes (T-board or Mini-Morlock)
•Macroline fittings
•on/off ASA and rail

Spimmy
•Spyder Body – vertical feed
•Spyder adjustable feed neck – 2-hole version
•Timmy Ram Sleeve
•Timmy Adjustable Ram Cap
•Timmy Ram
•Timmy Ram bumpers
•Timmy Poppet valve and seal
•Timmy bolt pin
•Timmy Solenoid
•Timmy Solenoid fittings and hose
•Electro Frame – we can modify most anything to fit – Clammy frame would be nice in the essence of time
•Aftermarket board and eyes (Mini-morlock)
•Timmy detents
•Hp Reg
•Lp Cocker Reg
•Macroline fittings
•on/off ASA and rail

Pneumatic-Framed Mag
•ULE Mag Body
•Adjustable feed neck
•Mag Vertical Adaptor
•Classic Valve
•LX or Level 7 bolt kit
•RT on/off assembly
•Clippard MPA3 or similar
•Clippard SMAV3 or similar
•2-finger Mag Aftermarket Frame (RPG, Logic, Intelli, etc.)
•Cocker lpr
•3/56 to 1/16” hose fitting
•10/32 to 1/8” hose fitting
•10/32 to 1/16” hose fitting
•Macroline fittings
•On/off ASA and rail

Half-Blocked, Stock Class/Regular Feed Convertible Pump Sniper
•12-Gram Quick Change Adaptor
•Cocker Swing Frame