|
|
JT
Excellerator 3.0-6.0 Disassembly Guide
Tools Needed
Allen Keys
Flathead screwdriver
Wooden Dowel
- REMOVE AIR and hopper from marker. Take the tank off the
marker
- Remove Barrel
- Remove hammer retaining pin
- CAREFUL! The hammer spring may force the backing out.
- Remove Bolt, Hammer, Hammer spring, hammer guide, bumper
- Remove the Grip Frame by taking the two allen screws out
with a 1/8" Allen screw
- Take the expansion chamber off at the same time.
- Remove the Allen key in front of the volumizer and remove
that assembly. This will allow the cup seal and valve spring
to come out.
- Using a flathead screwdriver, unscrew the valve retaining
screw in the bottom of the body.
- Use the wooden dowel to push the valve body out of the
marker body.
Due to having four different versions of the marker,
we will not address the grip frame nor the expansion chamber/regulator.
Please visit the BEOG
Forums for detailed information regarding those.
PICTURES coming soon!
Written by Kevmaster.
|
