Marauder Disassembly Guide

Tools Needed
1 Flathead screwdriver
1 Phillips Screwdriver.
1 Pliers or Adjustable wrench

1) Remove all air sources and paint from the marker. Make sure no air is left in the marker.

2) Unscrew the barrel

3) Remove the pull pins and slide the internals out of the back. Everything will come right apart. don't lose anything! You shouldn't need to remove the velocity screw, but if you do, just screw it on out with the supplied Allen wrench.

4) Tap out the front grip pin, then unscrew the hose from the bottomline on the grip.

5) Unscrew the hose from the body. THIS END OF THE HOSE IS REVERSE THREADED (Righty LOOSEY, Lefty Tightey)!!!!

6) If you feel the need to go further, unscrew the plug under the barrel threads, and let the spring and valve pin fall out. You can remove the detent with a Phillips head screwdriver if necessary. I don't recommend taking apart the grip internals, but if you must, tap out the pins and don't lose anything. There's nothing under the grip panel but air and plastic, but if you must, just take out the screws and remove it.

Written by Brewmaster.